What is Iran travertine?

Iran travertine belongs to the larger family of stone called Iran limestone also known as Calcium Carbonate. Iran marble is also a type of Iran limestone that has had additional heat and pressure applied to it by the earth’s crust. Iran travertine is formed by minerals dissolving in ground water and then being deposited on the earth’s surface by rivers, natural springs, or geysers.

What colors does marble travertine come in?

Iran marble comes in many different colors including ivory, beige, walnut, noce, and gold. The color of Iran travertine is the result of iron compounds or other organic impurities.

What does the finished surface of Iran travertine look like?

Iran travertine can have four major finishes, polished (shiny), honed (matte), brushed and tumbled (textured surfaces). The type of finish given to the Iran travertine will determine how shiny the surface will be. The polished and honed surfaces are flat and smooth, while the brushed and tumbled surfaces are flat and textured. The polished surface is the shiniest, while the tumbled surface reflects the least amount of light. The most common finish for Iran travertine is honed.

Where would I use Iran travertine?

Iran travertine has been used in the construction of buildings for thousands of year. In today’s construction, Iran travertine is used for flooring, cladding on buildings, showers, wall coverings and counter tops.

What should I consider in using travertine?

Iran travertine is a natural stone product. Because the minerals that make up travertine are highly reactive with acidic solutions (e.g. orange juice, vinegar), a major consideration is where the Iran travertine will be installed and what it will be exposed to. Sealers will provide some protection to the stone no matter what the environment, but knowing what it will be exposed to will help you decide whether Iran travertine is a good fit for your project.

How do I obtain Iran travertine or Iran marble samples?

Samples are available from Persian Marble. We can send you up to three stone samples for $US25.00 ($35.00 overnight delivery). Sample pieces are approximately 4”x 4”.

What are the volumes shipped by Persian Marble?

Persian Marble ships both Iran travertine and Iran marble tile in two volumes: either pallets or containers.

What is the minimum pallet order for Iran travertine / Iran marble tile?

Pallets are shipped from warehouses in North America and require a minimum order of two pallets (except for 12” x 12” tiles which have a minimum order size of one pallet with 420 sq ft). Building materials are heavy and will require proper equipment or labour to accept goods on delivery. Please check the weight of your goods before they are delivered so that you are properly prepared.

How much does a pallet of Iran travertine or Iran marble tile contain?

Pallet volumes start at 333 sq ft. and go up to 359 sq ft. depending on the size and thickness of the tile.

How much does a container hold?

Container volumes start at 5,000 sq ft. and go up to 7,500 sq ft. depending on the size and thickness of the tile.

I would like to see the pallets before I buy them. Is this possible?

Unfortunately, we are unable to show you the product at the warehouse. The warehouses we use are privately owned facilities and all products are in factory- sealed crates. We suggest ordering a sample and reviewing the graphics on the website.

How much breakage should I expect with an order?

It is not unusual to have 2% - 3% of the tile broken to some degree (e.g. chipped edges). Any amount up to 10% is still considered acceptable. These damaged tiles can be used for the cuts you will need to make. If breakage is above 10%, we would ask you to have it noted on the logistics receiving document and take pictures. Please make a claim with us within 10 days of receiving the order.

Persian Marble Company

Persian Marble Company is one of the leading companies in Iran for production of Iran travertine and Iran marble and Iran limestone and Iran onyx. Persian Marble Company was founded in 1987, whom they have been in the business for over 50 years .
Persian Marble Company started productions in the year 1987 the property owned by S.M co is 18,000 m2 of land and 4000 m2 of covered area in Iran , which is 30 km from Tehran.
in the year 2002 Persian Marble Company purchased the states of the arts machineries and equipment's from Italian Company , Barsanti machine co. Persian Marble Company has two 80 blades gang saws , tile line and one slab line to produce tiles and slabs in the different type of finishing such as honed , polished , antique , tumbled , carving , fireplace , pedestal , coulombs and mosaics.

Persian Marble best-equipped firm in Iran for tumbled , antique stone and mosaic.

Persian Marble Company collection , Iran Travertine and Iran Marble and Iran onyx and Iran limestone tiles sizes:
305 x 305 x 10 mm
400 x 400 x 10 mm
457 x 457 x 10 mm
600 x 600 x 20 mm

In different Finish such as Iran travertine filled; honed, polished, UN filled honed or polished, antique finish, tumbled , Slabs up to 2000 x 3000 x 20 or 30 mm.
Persian Marble Company collection mosaic available in a variety of shape and designs , borders , liners , accent and medallions.
Persian Marble Company willing to work with you on your special projects and cut to size jobs. Persian Marble Company has exported to North America , Europe , South Africa , and Russia.

Manufacturer and distributor of travertine tile. Factory direct prices. Iran Travertine is a beautiful Turkish Travertine that consists of a light mocha color with a slight touch of beige.
The surface finish has a honed brushed finish with chiseled edges that gives it an old world look, as if it has been there for years. It comes in a 4 size.

Guarantee of stone quality:

We guarantee same quality (or better) travertine stone flooring. We will beat any price by 10% with same or better quality.
Large supply of travertine pattern, big variety. let us help you compare Wholesale travertine pricing available.

Iran travertine , Iran marble , Iran onyx , Iran limestone Tiles:

Iran travertine ,Iran marble ,Iran onyx , Iran limestone tile is a type of stone that comes from different countries (including the Iran Article). Not all have the same physical characteristics. For instance, a certain type of; travertine, marble, onyx, limestone (from Iran) is extremely brittle. But it is not the only one, though. Certain poor grading of; Iranian travertine (the favorite among many builders, because it's very cheap no wonder! and yet carries the label of Iranian travertine;) are just as bad. Without seeing your floor it's impossible to make any sure assessment. I would suggest you to get hold of a professional.

As far as routine maintenance is concerned, travertine , marble , onyx, limestone like all calcite-based stones is very sensitive to pH active cleaning agents, therefore you do need specialty products. It is formed by geysers, like Old Faithful, when the extremely hot underground water dissolves the underlying Iran limestone and carries it upwards with the geyser water. When the water falls to the ground and evaporates, it leaves behind the dissolved limestone which re-hardens into stone. Like CalistogaTM or PerrierTM waters, the new stone is full of gas bubbles, which give travertine , marble , onyx , limestone its characteristic appearance. When it is manufactured as tiles or slabs, travertine , marble , onyx , limestone is generally filled with cement and polished or honed.

travertine , marble , onyx , limestone stone is said to encourage the brotherhood of all man or woman kind and symbolizes benevolence and good will, It alleviates hostilities, irritably and melancholy and to enhance generosity. The product is porous with many visible holes. It is available in coilers ranging from ivory to golden brown. The holes and cavities may be filled. travertine, marble, onyx , limestone is a sedimentary calciferous stone formed in hot springs. Typically, hot water passes through limestone beds and takes the calcium, from the limestone into suspension and takes that solution to the surface where the water evaporates and leaves the calcium crystals in layers on the surface.

travertine, marble , onyx , limestone can be cut on either a vein cut, which is against the bedding which reveals the bedding planes, or a fleur cut, which is along the bedding plane and reveals a flowery, often circular pattern. This cut is also referred to as a crosscut pattern. travertine , marble , onyx , limestone can be filled, usually with a cementicous filler, or left unfilled for a more rustic appearance. travertine , marble , onyx, limestone comes in several shades of cream/beige, brown, pink and gold, and is available in a number of different tile sizes and slab thickness. It is normally used for flooring, wall cladding, vanity tops, fireplace surrounds and furniture.

travertine , marble, onyx , limestone stone is soft and delicate to look at. It breathes spaciousness. It's relaxed and soothing. The feeling is peaceful, tranquil, serene. It's a simple beauty. A casual formalness. The classic aged look of tumbled stone will warm your home. A polished or honed travertine, marble , onyx , limestone becomes a bit more formal but yet, it's still inviting. The soft earthy hues of this natural stone truly keep it in tune with nature. travertine, marble , onyx , limestone stone is a form of limestone. It often forms near hot bubbly mineral rich springs. Gas bubbles become trapped and create a pitted surface on the stone. These pitted surfaces can be filled with an epoxy or dust resin. Filling the small holes and pits gives the travertine, marble , onyx , limestone a more finished look. A refined beauty. The stone surface can also be left in its natural state with the small holes and pits unfilled. This is a warmer aged look which will acquire a beautiful patina over time. Leaving the stone unfilled will affect the durability. It will stain and attract dirt much easier than a filled travertine , marble , onyx , limestone. This is a calcareous stone. It is highly reactive to the acids found in lemons, vinegar, alcohol, etc. These acids will etch the stone by leaving marks and rings. Similar to Iran limestone, Iran travertine , Iran marble , Iran onyx , also varies in hardness, density, and porosity. Some Iran travertine , Iran marble , Iran onyx , Iran limestone stones are harder than others..

travertine , marble , onyx , limestone colors are in warm earthy tones. From the softest ivories to the palest creams. Rich shades of golden honey and silvery greens to deep _mocha browns. travertine , marble , onyx , limestone never appears as one solid color. The color tones vary and veins or bands of contrasting color run throughout the stone. No two stones or tiles are alike. If you plan to tile with Iran stones lay out all the tiles first.

This will help with the flow of color and veining. It will give you a feel for the stone. What is stone used for? It is used for interior walls such as backsplashes. There are Iran travertine , Iran marble , Iran onyx , Iran limestone sinks, floors, mosaic tiles, statuary, fireplace surrounds, tub surrounds, vanities, and end tables. It's also used for; accessories such as light switch plates, trim, vases, and coasters. It scratches, stains, and absorbs liquids easier than other natural stones. If you plan to use; Iran travertine , Iran marble , Iran onyx , Iran limestone for your countertop, make sure it is a harder and less porous stone.

It works well for flooring and smaller spaces. This stone seems to open up small; areas and makes them feel more spacious and airy. The surface finishes for travertine, marble , onyx, limestone stone vary. Not all stones are capable of the polished/high gloss finish. Only the harder types. This stone will never achieve the same glossy finish as a granite will. A honed finish is the most popular type of finish. It's not a shiny and reflective finish. More of a matte; or a sheen finish. Tumbled Iran travertine , Iran marble, Iran onyx , Iran limestone makes the stone appear scuffed, weathered , or aged. Talk to your fabricator/installer about the different types of; finishes they may provide. Creating a unique look with travertine ,marble , onyx , limestone stone is simple. Mix and match with other natural stones for a more dramatic look and feel. Or, use it alone for sheer; simplicity. This natural stone will give you years of beauty to enjoy. Using Iran travertine , Iran marble , Iran onyx , Iran limestone stone is only limited by your imagination and a little common sense.